Support
Joined: 09 Oct 2002 Posts: 175 Location: Lausanne, Switzerland
|
Posted: Fri Jan 24, 03 10:29 Post subject: What are the default settings for the MultiCom routers? |
|
|
The default settings below are a configured as below for each configuration file of the MultiCom routers.
Command | Setting | MyName | MultiCom | ARP proxy | on | DNS Cache | enable | IP Filter RouterFrames | off | IP MyAddr | 10.0.0.1 | IP SubnetMask | 255.255.255.255 | IP Router | off | IP SendNetBroadcast | off | IP translation | off | IPX router | off | IPX site | off | ISDN Auto | off | ISDN BChannel | 1 | ISDN Callback | off | ISDN DChannelProtocol | EuroISDN | ISDN ErrorResetTime | 60 minutes | ISDN IdleCloseTime | 60 seconds | ISDN Interface | MSN on BRI interfaces | | DDI on PRI interfaces | ISDN Leased | off | ISDN MaxBackoff | (24h) or 86,400s | ISDN MaxTries | 20 | ISDN NeverBusy | on | PPP Callback | reject | PPP Compression | on | PPP EchoRequest | on | PPP Local Authentication | none | PPP Multilink | on | PPP Periodic Chap | on | PPP Remote Authentication | either | RIP Broadcast | off | SNMP AuthTrap | enable | SNMP Community | public/read | Syslog | facility=user/ priority=info | |
|