MultiCom Technical Support Forum Index MultiCom Technical Support
Supporting MultiCom Routers, Firewalls and VPN
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

What is the default configuration of the router ?

 
Post new topic   Reply to topic    MultiCom Technical Support Forum Index -> 3.x Frequently Asked Questions
View previous topic :: View next topic  
Author Message
Support



Joined: 09 Oct 2002
Posts: 175
Location: Lausanne, Switzerland
PostPosted: Wed Oct 09, 02 17:01    Post subject: What is the default configuration of the router ? Reply with quote
The default configuration for firmware 3.1+ is as follows. It can also be restored by holding down the "config" button of the Ethernet Gateway during rebooting, be sure to continue to hold the button until the leds have stopped blinking.



Gateway Security LAN InterfaceWAN Interface DMZ Interface
Username = multicom
Password = none

SNMP: disabled
Syslog Notification: disabled		IP address: 10.0.0.1
Netmask: 255.0.0.0
DHCP server activated
DHCP range 10.0.0.17-10.0.2.254
Proxy DNS enabled		 IP address: dynamic
Netmask: dynamic
DHCP client activated
NAT: activated
Firewall: activated		 IP address: none
Netmask: none
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    MultiCom Technical Support Forum Index -> 3.x Frequently Asked Questions All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group